home skip_previous fast_rewind fast_forward skip_next
27-05-2010 
27-05-2010 
AUTOMATIC DOOR LOCKING
You can select the following functions:
- Locking linked with the shift position
All doors are automatically locked when the selector lever
is moved out of “P” position.

- Locking linked with vehicle speed
All doors are automatically locked when the vehicle speed
goes above about 20 km/h (12 mph).

You can set or cancel the automatic door locking
functions:

Be sure to apply the parking brake when performing the following operations.

To select the locking linked with the shift position:
1. Close all doors and turn the ignition switch to the “ON”
position.
2. Shift the selector lever to the “P” position.
3. Within 10 seconds of turning the ignition switch to the “ON”
position, press and hold the driver’s side power door lock
switch in the lock position for 5 seconds and then release.
The doors will be locked and unlocked to indicate that the
function is set.


To cancel the function, do the above operation again.


To select the locking linked with the vehicle speed:
1. Close all doors and turn the ignition switch to the “ON”
position.
2. Shift the selector lever from “P” to the ”N” position.
3. Within 10 seconds of turning the ignition switch to the “ON”
position, press and hold the driver’s side power door lock
switch in the lock position for 5 seconds and then release.
The doors will be locked and unlocked to indicate that the
function is set.
To cancel the function, do the above operation again.


AUTOMATIC DOOR UNLOCKING
You can select the following functions:

- Unlocking linked with the ignition switch
All doors are automatically unlocked when the driver’s door
is opened within 10 seconds after the ignition switch is
turned to the “ACC” or “LOCK” position, or the key is
removed.

- Unlocking linked with the shift position
All doors are automatically unlocked when the selector lever
is moved to “P” position.
You can set or cancel the automatic door unlocking

Be sure to apply the parking brake when performing the
following operations.

To select the unlocking linked with the ignition switch:
1. Close all doors and turn the ignition switch to the “ON”
position.
2. Shift the selector lever from “P” to the “N” position.
3. Within 10 seconds of turning the ignition switch to the “ON”
position, press and hold the driver’s side power door lock
switch in the unlock position for 5 seconds and then release.
The doors will be locked and unlocked to indicate that the
function is set.
To cancel the function, do the above operation again.

To select the unlocking linked with the shift position:
1. Close all doors and turn the ignition switch to the “ON”
position.
2. Shift the selector lever to the “P” position.
3. Within 10 seconds of turning the ignition switch to the “ON”
position, press and hold the driver’s side power door lock
switch in the unlock position for 5 seconds and then release.
The doors will be locked and unlocked to indicate that the
function is set.

To cancel the function, do the above operation again.

От себя добавлю, что количество секунд ожидания очень важно. Если написано 5 секунд, то это не 3 и не 8.

_________________

08 Lexus GS350 AWD - мой
08 Lexus RX350 AWD - жены

  •  
27-05-2010 
27-05-2010 
  •  
27-05-2010 
27-05-2010 

_________________

Энтропия уже не та!

  •  
27-05-2010 
27-05-2010 
Извините, не знал. Я здесь редко бываю.

_________________

08 Lexus GS350 AWD - мой
08 Lexus RX350 AWD - жены

  •  
Реклама для незарегистрированных пользователей. Зарегистрироваться в Клубе
Новая тема  
Все форумы  »  Клуб Lexus RX  » Lexus RX/HARRIER II (2003-2009) Правила форумов